Function: Internship
Contract: Internship agreement
Starting date: February 2027
Duration: 6 months
Workplace: IPVF – 18 bd Thomas Gobert, 91120 Palaiseau (France)
Education: M2 or Engineering school in Materials science, chemistry, physical chemistry
Ref.: PR-F-L-3-ST
IPVF – Institut Photovoltaïque d’Île-de-France
IPVF is a scientific and technical pole dedicated to the research and development of solar technologies. It permanently hosts its own staff, as well as the employees of its partners and external companies. IPVF aims to become one of the world’s leading centers for research, innovation, and training in the field of energy transition.
IPVF primary objective is to improve the performance and competitiveness of photovoltaic cells and develop breakthrough technologies by relying on four levers:
• Ambitious research program.
• The hosting of more than 200 researchers and their laboratories on its Paris-Saclay site.
• A state-of-the-art technology platform (8,000 m²) open to the photovoltaic industry actors, with more than 100 state-of-the-art equipment units located in clean rooms.
• A training program mainly based on a master’s degree, the supervision of PhD students, and continuing education.
CONTEXT
Silicon solar cells are now close to their theoretical efficiency limit. Over the past decade, perovskite solar cells (PSCs) have emerged as a new generation of photovoltaic technology, reaching record efficiencies on par with silicon1, but their stability still lags far behind. Recombination at interfaces is a major obstacle to both efficiency and long-term stability, which makes effective passivation strategies essential2.
Passivation consists of depositing an ultra-thin layer of material or molecules directly on the perovskite to improve its surface properties. In recent years, passivation with ammonium and amidinium salts, which form a thin 2D layer in situ on the 3D absorber surface, has become widely adopted. 3D/2D heterostructures are now a leading configuration for PSCs: the 2D surface layer passivates defects in the 3D perovskite and improves both device efficiency and stability3. However, many challenges remain in building a well-controlled 3D/2D stack, such as controlling the phase purity and thickness of the 2D layer, ensuring its uniformity over large areas, and removing the excess ligand without damaging the underlying 3D perovskite.
At IPVF, we develop this type of passivation on wide-bandgap perovskites (1.68eV) deposited by slot-die coating, as a scalable technique that enables uniform deposition over large areas from liquid inks. This internship aims to optimize the slot-die deposition of the passivation layer, with a particular focus on solvents: those used to dissolve the organic salts, and those applied as a post-treatment to reorganize and recrystallize the interfacial 2D layer.
The goal is to build a library of solvents compatible with both the 3D perovskite absorber and the 2D layer, along with selection criteria that can be extended to other ligands. From this library, the intern will identify the solvents or solvent mixtures that enable a uniform post-treatment of the 2D passivation layer, removing excess ligand without degrading the 3D or 2D phases.
References:
1. Best Research-Cell Efficiency Chart | Photovoltaic Research | NLR
2. Liu, S., Miao, T., Zhang, Y., Liu, Z., Chen, W., & Park, N. G. (2026). Progress in High-Efficiency Inverted Perovskite Solar Cells: Charge Transport, Interface Engineering, and Stability. ACS Energy Letters, 11(4), 3121-3147. https://doi.org/10.1021/acsenergylett.6c00115
3. Chang, X., Azmi, R., Yang, T. et al. Solvent-dripping modulated 3D/2D heterostructures for high-performance perovskite solar cells. Nat Commun 16, 1042 (2025). https://doi.org/10.1038/s41467-025-56409-5
MAIN MISSIONS
The internship will follow four steps:
1. Literature review and solvent selection. Based on the literature and favoring less toxic solvents with a low environmental impact, the intern will draw up a list of candidate solvents or solvents mixtures for the passivation process, and define the selection criteria.
2. Screening of solvents compatible with the 3D perovskite. The candidate solvents, together with the reference passivation ink solvent, will be applied alone to 3D perovskite films using scalable deposition technique. Their impact will be assessed by photoluminescence (PL), and quasi-Fermi level splitting (QFLS), SEM and GIXRD, in order to select the solvents that preserve the 3D perovskite.
3. Post-treatment of the 3D/2D stack. The selected solvents will then be applied as a post-treatment to IPVF’s 3D/2D stacks using scalable deposition techniques, to remove the excess ligand without dissolving the 2D layer. Using the same characterization techniques as in step 2, the intern will identify the solvents and process conditions that maintain the integrity of the 3D/2D stack while maximizing the passivation effect.
4. Integration into complete devices. The results of steps 1 to 3 will be used to fabricate complete inverted (p-i-n) semi-transparent perovskite solar cells, which will be characterized electrically (J-V, EQE) and optically (PL, QFLS).
Candidate profile
Knowledge of:
– Good command of written and spoken English
– Materials science
– Solution Chemistry
– Semi-conducteur physics
– Basic characterisation techniques for solution and thin film
Hard skills:
– Lab work
– Design of experiments
– Data analysis
– Literature review